Alex-Tech Viper series of lathes is a series of sturdy machines with solid cast torsion free box-ways, secured through special structure of the bed way

Specifikation

Type

Slantbed lathe

Specifikationer Unit VT-30 (500/1000/1500/2000/2500/3000) VT-33 (500/1000/1500/2000/2500/3000) CAPACITY       Swing over Z way cover mm (inch) 680 (26.8") 680 (26.8") Max. turning diameter mm (inch) 480 (18.9") 480 (18.9") Swing over cross slide mm (inch) 480 (18.9") 480 (18.9") Max. turning length mm (inch) 480 (18.89'') L=500 980 (38.58") L=1000 1480(58.26") L=1500 1980 (77.95") L=2000 2480 (97.63") L=2500 2980(117.3") L=3000 480 (18.89'') L=500 980 (38.58") L=1000 1480(58.26") L=1500 1980 (77.95") L=2000 2480 (97.63") L=2500 2980(117.3") L=3000 Slide way slant angle degree 45 45 TRAVEL       X-axis travel mm (inch) 240+40 (9.44"+1.57") 240+40 (9.44"+1.57") Z-axis travel mm (inch) 500 (19.7") 1000 (39.4") 1500 (59") 2000 (78.7") 2500 (98.4") 3000 (118.1") 500 (19.7") 1000 (39.4") 1500 (59") 2000 (78.7") 2500 (98.4") 3000 (118.1") W-axis travel (Sub) mm (inch) 760 (29.9") L=1000 760 (29.9") L=1000 SPINDLE       Type of spindle nose ISO A2-11 A2-11 Chuck diameter & type(option) mm (inch) 305 (12") 380 (15") Spindle bearing inner diameter mm (inch) 180 (7.08") 180 (7.08") Through spindle hole diameter mm (inch) 110 (4.33") 131 (5.15") Through bar capacity mm (inch) 90 (3.54") 115 (4.52 ) Spindle drive motor(cont/30min) KW (Hp) 26(35) 37(50) Spindle speed range rpm 3000 2400 TURRET       Number of tool stations   12 (SW=400) 12 (SW=400) Turret type   STATIC STATIC Turret indexing time sec 0.9 (Hydraulic) / 0.15 (Servo driver) 0.9 (Hydraulic) / 0.15 (Servo driver) Shank height of square tool mm (inch) 25 (1") 25 (1") Shank diameter for boring bar mm (inch) 50 (2") 50 (2") FEEDRATE       Rapid traverse rate X-axis M/min 20 20 Rapid traverse rate Z-axis M/min 24(0.5M) / 24(1M) / 22(1.5M) / 20(2M)/ 18(2.5M) / 16(3M) 24(0.5M) / 24(1M) / 22(1.5M) / 20(2M)/ 18(2.5M) / 16(3M) Ballscrew diameter of X-axis mm (inch) 32*P10 32*P10   mm (inch) 40*P10 40*P10 Ballscrew diameter of Z-axis 50*P12 (3M) 50*P12 (3M) TAILSTOCK       Tailstock travel mm (inch) 480 (18.89'') L=500 980 (38.58") L=1000 1480(58.26") L=1500 1980 (77.95") L=2000 2480 (97.63") L=2500 2980(117.3") L=3000 480 (18.89'') L=500 980 (38.58") L=1000 1480(58.26") L=1500 1980 (77.95") L=2000 2480 (97.63") L=2500 2980(117.3") L=3000 Tailstock spindle diameter mm (inch) 110 (4.33") 110 (4.33") Tailstock spindle travel mm (inch) 100 (4") 100 (4") Taper hole of tailstock spindle   MT-5 MT-5 Sub-SPINDLE   L=1000mm   L=1000mm  Type of sub-spindle nose ISO A2-6 A2-6 Chuck diameter & type(option) mm (inch) 200 (8”) 200 (8”) Sub-Spindle bearing inner diameter mm (inch) 110 (4.33") 110 (4.33") Through spindle hole diameter mm (inch) 61 (2.4") 61 (2.4") Through bar capacity mm (inch) 51 (2") 51 (2") Sub-Spindle drive motor(cont/30min) KW (Hp) 11 (15)  11 (15)  Sub-Spindle speed range rpm 4000 4000 REMARKS       Coolant pump motor Kw (Hp) 0.6 (3/4) 0.6 (3/4) Coolant tank capacity L   203 /244 / 285 / 326 / 408 / 449 203 /244 / 285 / 326 / 408 / 449 Floor space mm (inch) 4464 (175.7") (L) * 1951(76.8") (W) 4964 (195.4") (L) * 1951(76.8") (W) 5464 (215.1") (L) * 1951 (76.8") (W) 5964 (234.8") (L) * 1951 (76.8") (W) 7011 (276") (L) * 1951 (76.8") (W) 7635 (300.5") (L) * 1951 (76.8") (W) 4464 (175.7") (L) * 1951(76.8") (W) 4964 (195.4") (L) * 1951(76.8") (W) 5464 (215.1") (L) * 1951 (76.8") (W) 5964 (234.8") (L) * 1951 (76.8") (W) 7011 (276") (L) * 1951 (76.8") (W) 7635 (300.5") (L) * 1951 (76.8") (W) Machine weight Kg (lb) 5830 (12826) 6930 (15246) 8030 (17666) 9130 (20086) 10230 (22506) 11330 (24926) 6200 (13640) 7300 (16060) 8400 (18480) 9500 (20900) 10600 (23320) 11700 (25740)

Standard tilbehør

STANDARD FEATURES
	Auto Lubrication System		Hard Jaw (1-Set)
	Block for Base		Heat Exchange for Control System
	Cooling System		Hydraulic Adjustment System
	Coolant Tank Guard		Soft Jaws (1-Set)
	Chip Conveyor		Tool box with Hand Tools
	Fluid Bearing Way System		Work Light
	Lubrication Monitoring System

Ekstra tilbehør

OPTIONAL ACCESSORIES
‧Air Chuck
‧Automatic gantry loading and unloading system
‧Bar feeder interface (Factory order only)
‧Collect Chuck (16C)
‧Heavy parts loader
‧High pressure coolant pump and large capacity tank
‧High pressure coolant thru turret 300 psi(4 gpm)
‧High pressure coolant thru turret 1000 psi(8 gpm)
‧Static VDI-40 turret, 12-tool
‧50 hp spindle motor
‧Self-centering steady rest SMW autoblok
‧Tool presetter
‧Torque limter clutch
‧Torque limter clutch