Bed & longitudinal slide X
• Pearlite grey cast iron frames, quality EN-GJL-300
• Thermally stabilized and reinforced bed frame with internal ribs every 500 mm. Hardness of 190-220 HB
• 2 linear guide ways size 55
• 6 linear carriages size 55 mounted on the X slide
• 2 rollers carriages RUSV in the central part of X slide to avoid deformations

Column and ram slides
• Pearlite grey cast iron quality EN-GJL-300 structures
• Thermally stabilized and robustly reinforced with ribs. Hardness of 190-220 HB
• 8 linear carriages in Y slide
• 8 linear carriages in Z slide
• 2 linear guide ways size 45 (Y & Z)

Ram and head
• The ram is made of pearlitic grey cast iron, quality EN-GJL-300 (UNE-EN 1561 standard), with a hardness of 190-220 HB, and is dimensioned and robustly reinforced with inner ribs to absorb the cutting and weight forces, and studied by finite elements.
• The ram has two size-45 rolling linear guide ways with recirculation rolls carriages, closed and protected against contamination.
• Mechanical compensation to get perpendicularly of main axis with the table
• Main motor with 2 speed reduction gearbox
• Automatic universal milling head 2,5° x 2,5°
• Both bodies of spindle head are made of spheroidal graphite cast iron, quality EN-GJS-HB155 (UNE-EN 1563 standard), with a hardness of 130-180 HB.
• The Spindle head is made up of two parts joined at 45º, which rotates around each other and are joined to the front part of the ram.
 Hardened and ground Klingerlberg-type epicyclical taper gears.
 Hardened and ground spindle shaft DIN 5480 (gear type).
 Main spindle bearing diameter 85 x 130 mm.
 Super-precision angular-contact ball bearings on the entire head.
 Hydro-mechanic type tool clamping system (clamping force 12 / 14 kN).

Drivings and others
• Brushless servomotors
• Driving mechanism through motor - pulley & belt
• Transmision mechanism by precision ball-screws
• Measuring system by precision linear scales for all axis

Slide X
• Double motor and pignion transmission system with electrical preload
• 2 independent motors with planetary high precision reductors
• Functionning system “Master – Slave”
• Power of motors 2 x 5,37 Kw-36 Nm
• Pushing force 31.140,43 N

Slides Y & Z
• Ball screw transmission
• Y axis ball screw size Ø 50 x 16 mm
• Z axis ball screw size Ø 50 x 12 mm
• Driving through AC Brushless
• Power motors Z & Y: 5,37 Kw – 36 Nm
• Pushing force axis Z 18.535,44 N
• Pushing force axis Y 13.901,58 N

Specifikation

Type		Moving coloumn milling machine
Control		Fanuc, Siemens, Fagor and Heidenhain

1.1      MACHINE DESCRIPTION: MOVING COLUMN MILLING MACHINE LAGUN GMM 4 GMM 5 GMM 6 GMM 8 GMM 10 GMM 12 TABLE WORKING SURFACE (mm) UNDER CUSTOMER REQUEST TRAVERSE LONGITUDINAL – X AXIS (mm) 4000 5000 6000 8000 10000 12000 CROSS – Y AXIS (mm) 1200 VERTICAL – Z AXIS (mm) 1500/2000* RAPID FEEDS LONGITUDINAL – X AXIS (mm/min) 20000 CROSS – Y AXIS (mm/min) 20000 VERTICAL – Z AXIS (mm/min) 20000 SPINDLE (MAIN SPINDLE) SPINDLE TAPER ISO 50 DIN 69871/A SPEED RANGE (min-1) 3000/4000* MAIN MOTOR MAIN MOTOR POWER (kW) 28/34,5 SERVOMOTOR POWER (kW) 9,6 COOLING MOTOR PUMP (kW) 1,1 CENTRAL LUBRICATION PUMP (kW) 0.15 CENTRAL HYDRAULIC UNIT (kW) 0.75 MACHINE ACCURACY POSITIONING (mm) A: 0,015 REPEATABILITY (mm) R: 0,008 MEASUREMENT PLANT LAYOUT (mm) 8737x3145 9737x3145 10737x3145 12869.5x3145 14869.5x3145 17011x3145 MACHINE HEIGHT (mm) 4008/5008* WEIGHTS NET WEIGHT WITHOUT TABLE (Kgs) 22500 23500 24500 26500 28500 30500 GROSS WEIGHT WITH SEA PACKING (Kgs) 25500 27500 29000 32500 37500 42500 TOTAL INSTALLED POWER (kW) 54 (*) Optional

Standard tilbehør

Standard tilbehør   CNC styring Automatisk Universalhoved 2,5° x 2,5° 2- trins gearkasse Kølevands system Manual fodpedal for manuel værktøjsskift

Ekstra tilbehør

Ekstra tilbehør, Optioner   Hoveder Spåntransportør(er) Køling gennem spindel rundborde 4.- og 5.-akse Værktøjsvekslere vertikal Værktøjsvekslere horisontal og vertikal Pendulære arbejdszoner Floorplate (s)