Inklusiv
Big size machining centres, with a wide range of different heads and a high automation level.
Symmetric and robust cast iron estructure which in combination with the linear guiding system provides a high dynamics, reaching 30 m/min in rapid feed.
Spindle motor power with 37 kW (S1) and high torque able to carry out very exigent machinings in all kind of materials.
The smallest model TX1 has travels of 2000x1500x1500 with rotary table up to 6000 kg.
In the biggest model TX3, large parts can be machined of up to 3000 mm high and 6000 long, with a maximum of 20.000 kg.
These machines are supplied either with a rotary table or with several pallets in front or sides of the table, depending on the available space at customer plant.
Depending on the type of head, there are 4 different models :
BORING CENTRE TX1S-TX3S
HORIZONTAL MACHINING CENTER TX1H
UNIVERSAL MACHININGCENTER TX1D-TX3D
5-AXIS MACHINING CENTER TX1K-TX3K
5-AXIS MACHINING CENTRE TX1K-TX3K | |
|
Working range | |
|
X-Axis Table Cross travel | mm | 2000-3000-4000-5000 | |
|
Y-Axis Headstock vertical | mm | 1500-2000-2500-3000 | |
|
Z-Axis Column long. travel | mm | 1500-2000-2500 | |
|
5-axis “TWIST” head | |
|
A-axis indexing | | 0,001º (continuous rotation) | |
|
A-axis range | º | +/- 105 | |
|
Spindle Power (S1) | kW | 30 | |
|
Max. Spindle Speed | min-1 | 5000 ( 10000 ) | |
|
Spindle Torque (S1) | Nm | 940 ( 300 ) | |
|
Spindle Gear Ranges | | 2 | |
|
Rotary Table | | MG-6 MG-12 MG-20 | |
|
Table or Pallet Size | mm | 1250x1250 / 1250x1600 / 1250x2000 / 1450x1600 / 1600x2000 / 2000x2000 / 2000x2500 | |
|
Table rotation speed | min-1 | 3 | |
|
Max. Table Loading Capacity | kg | 6000 / 12000 / 20000 | |
|
Max. Pallet Loading Capacity | kg | 5000 / 10000 / 15000 | |
|
Rapid feed | |
|
X, Y, Z | mm/min | 25000 | |
|
| |
This model is ideal for 4 and 5 axes machining, combining 3 linear axes with 2 rotary ones (B-axis table rotation and A-axis head twist axis). |
|
All axes are able to work simultaneously. |
|
The twist type head, with a continuous rotating axis, it's a very robust construction, with a high accuracy level and big chip removal capacity, being the optimal solution for machining of blades, propellers, turbines, etc up to 2000 mm diameter and 20.000 kg. |
|
According to final application, there is a mechanical head (5000 rpm) and another one with electrospindle (24000 rpm). |
|
| |