Bed & longitudinal slide X
• Pearlite grey cast iron frames, quality EN-GJL-300
• Thermally stabilized and reinforced bed frame with internal ribs every 500 mm. Hardness of 190-220 HB
• 2 linear guide ways size 55
• 6 linear carriages size 55 mounted on the X slide
• 2 rollers carriages RUSV in the central part of X slide to avoid deformations

Column and ram slides
• Pearlite grey cast iron quality EN-GJL-300 structures
• Thermally stabilized and robustly reinforced with ribs. Hardness of 190-220 HB
• 8 linear carriages in Y slide
• 8 linear carriages in Z slide
• 2 linear guide ways size 45 (Y & Z)

Ram and head
• The ram is made of pearlitic grey cast iron, quality EN-GJL-300 (UNE-EN 1561 standard), with a hardness of 190-220 HB, and is dimensioned and robustly reinforced with inner ribs to absorb the cutting and weight forces, and studied by finite elements.
• The ram has two size-45 rolling linear guide ways with recirculation rolls carriages, closed and protected against contamination.
• Mechanical compensation to get perpendicularly of main axis with the table
• Main motor with 2 speed reduction gearbox
• Automatic universal milling head 2,5° x 2,5°
• Both bodies of spindle head are made of spheroidal graphite cast iron, quality EN-GJS-HB155 (UNE-EN 1563 standard), with a hardness of 130-180 HB.
• The Spindle head is made up of two parts joined at 45º, which rotates around each other and are joined to the front part of the ram.
 Hardened and ground Klingerlberg-type epicyclical taper gears.
 Hardened and ground spindle shaft DIN 5480 (gear type).
 Main spindle bearing diameter 85 x 130 mm.
 Super-precision angular-contact ball bearings on the entire head.
 Hydro-mechanic type tool clamping system (clamping force 12 / 14 kN).

Drivings and others
• Brushless servomotors
• Driving mechanism through motor - pulley & belt
• Transmision mechanism by precision ball-screws
• Measuring system by precision linear scales for all axis

Slide X
• Double motor and pignion transmission system with electrical preload
• 2 independent motors with planetary high precision reductors
• Functionning system “Master – Slave”
• Power of motors 2 x 5,37 Kw-36 Nm
• Pushing force 31.140,43 N

Slides Y & Z
• Ball screw transmission
• Y axis ball screw size Ø 50 x 16 mm
• Z axis ball screw size Ø 50 x 12 mm
• Driving through AC Brushless
• Power motors Z & Y: 5,37 Kw – 36 Nm
• Pushing force axis Z 18.535,44 N
• Pushing force axis Y 13.901,58 N